Thanks Thanks:  18
Likes Likes:  39
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Oblivious To The 5th Gen RAM Trucks

  1. Top Of Page | #1

    Question Oblivious To The 5th Gen RAM Trucks

    I need to find the best way to gut the SCR with keeping the factory's new look.

    I could cut it open and weld it back somewhere hidden, but are there any other ways to knock it out without having to weld it back up like they are the DPF.

    Also, do I need to cut the metal things in the ends that I assume disperse the def fluid evenly from what I gather look like fan blades almost?

    Any suggestions would be greatly appreciated.


  2. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  3. Top Of Page | #2
    MOD watersupply189's Avatar

    User Info Menu

    Oblivious To The 5th Gen RAM Trucks

    If you gut it out without a tuner, you will throw it into limp mode unless you plan to tune it, which you stated was out of the question.


    2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  4. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS liked this post
  5. Top Of Page | #3

    Oblivious To The 5th Gen RAM Trucks

    I already ordered the tuner.

    All I am asking is the best way to gut the SCR, or will I have to cut it open and reweld it.


  6. Thanks watersupply189, IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  7. Top Of Page | #4
    MOD watersupply189's Avatar

    User Info Menu

    Oblivious To The 5th Gen RAM Trucks

    Quote Originally Posted by patriottransport85 View Post
    I already ordered the tuner.

    All I am asking is the best way to gut the SCR, or will I have to cut it open and reweld it.
    I’m not sure the best way to gut one.

    I’ve heard of folks cutting them open and welding it back.

    Some have stated that when gutting it out that sometimes it will rattle.

    Maybe a drill with a long extension with some hole saw or something to that nature, but I believe cutting it open is the best route to get everything out of it.

    Hopefully, someone who’s gutted one can chime in.


    2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  8. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS liked this post
  9. Top Of Page | #5
    Watch Dog! Corkey's Avatar

    User Info Menu

    Oblivious To The 5th Gen RAM Trucks

    I believe one of our members had just done this within a week or so.

    He ran into issues; if i recall correctly, he drilled the hole too small, which resulted in a smoky mess & couldn't get boost pressures up.

    He corrected the issue with the help of a fellow member step by step, which brought his truck right back to life and then some.

    I'll tag him if I can find it.

    @B69NoDEF

    Could you help this member out with what you did for your rig?

    I sure hope you're the correct member that i looked up, or I'll look like an idiot.

    II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS

  10. Thanks watersupply189, AK Bob, Power247, IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  11. Top Of Page | #6
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Oblivious To The 5th Gen RAM Trucks

    Quote Originally Posted by corkey View Post
    I believe one of our members had just done this within a week.

    He ran into issues; if i recall correctly, he drilled the hole too small, which resulted in a smoky mess & couldn't get boost pressures up.

    He corrected the issue with the help of a fellow member step by step, which brought his truck right back to life and then some.

    I'll tag him if I can find it.

    @B69NoDEF

    Could you help this member out with what you did for your rig?

    I sure hope you're the correct member that i looked up, or I'll look like an idiot.
    No problem, you have the correct member.

    RaceME Ultra Help!

    Link: https://www.igotacummins.com/threads...eME-Ultra-Help!

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  12. Thanks Corkey, IGOTACUMMINS thanked for this post
    Likes Corkey, watersupply189, IGOTACUMMINS liked this post
  13. Top Of Page | #7

    Re: Oblivious To The 5th Gen RAM Trucks

    I can leave all plugs plugged in after gutting the DPF and SCR correctly?

    So all I need to do is gut DPF/SCR and put the tune on the truck, and I'm ready to go, correct, or are they more to it.


  14. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  15. Top Of Page | #8
    MOD watersupply189's Avatar

    User Info Menu

    Re: Oblivious To The 5th Gen RAM Trucks

    Quote Originally Posted by patriottransport85 View Post
    I can leave all plugs plugged in after gutting the DPF and SCR correctly?

    So all I need to do is gut DPF/SCR and put the tune on the truck, and I'm ready to go, correct, or are they more to it.
    Correct!


    2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  16. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS liked this post
  17. Top Of Page | #9

    Re: Oblivious To The 5th Gen RAM Trucks

    Thank you!!!


  18. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  19. Top Of Page | #10
    CrazyTrain's Avatar

    User Info Menu

    Re: Oblivious To The 5th Gen RAM Trucks

    Quote Originally Posted by patriottransport85 View Post
    I can leave all plugs plugged in after gutting the DPF and SCR correctly?

    So all I need to do is gut DPF/SCR and put the tune on the truck, and I'm ready to go, correct, or are they more to it.
    Are we to assume that you are subject to visual-only inspections?

    Otherwise, why not just get the delete pipes and an FTE resonator?

    If you need to reinstall, you will have the necessary parts.

    I am hoping you are not a troll or a spy.

    2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
    2wd low loc kit.
    Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.

  20. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •