Replace Entire Windshield Washer Reservoir?

[jgruberman]

I think the pump broke off the windshield washer reservoir (pic below), and I'm wondering if the part is replaceable by itself or if I need to replace the entire reservoir.







Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

Let me ask this.

I found this part, but it seems to have a black grommet:

https://www.autozone.com/electrical-and-lighting/windshield-washer-pump/p/taap-windshield-washer-pump-5-154/295788_0_0?bvstate=pg:2/ct:r

But this part is white and seems to match what I have based on the above-damaged pics:

https://www.autozone.com/collision-body-parts-and-hardware/windshield-washer-pump-grommet/p/dorman-windshield-washer-pump-grommet-49459/301804_0_0

Do you know what the difference is in grommet?

I don't mind buying the white one if that's what I need; I was hoping to understand a bit better.


Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[watersupply189]

I would take the broken part down to Autozone and compare it with what they have.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[jgruberman]

I couldn't remove the broken part because the fluid was still slowly leaking, but I bought the abovementioned parts, which fit perfectly.

I'm about to go pick up more fluid and fill up the whole reservoir and see if it leaks again, but hopefully, that took care of the issue.

Better than buying a brand-new Mopar reservoir for $250.00.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[Corkey]

I would fill it with water to verify the leak is fixed and save on wiper fluid money.

Once the leak stops, then fill up with desired wiper fluid brand.

If the leak is fixed, eject the water as much as possible on the window to empty the reservoir.

 0 Comment(s)

[jgruberman]

I would fill it with water to verify the leak is fixed and save on wiper fluid money.

Once the leak stops, then fill up with desired wiper fluid brand.

If the leak is fixed, eject the water as much as possible on the window to empty the reservoir.

That probably would have been a good idea had I not just filled it up with a gallon that I already had of fluid.

I typically tend to keep a surplus of all fluids, LOL.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[AK Bob]

I couldn't remove the broken part because the fluid was still slowly leaking, but I bought the abovementioned parts, which fit perfectly.

I'm about to go pick up more fluid and fill up the whole reservoir and see if it leaks again, but hopefully, that took care of the issue.

Better than buying a brand-new Mopar reservoir for $250.00.

Sent from my SM-S908U using Tapatalk

If you need to replace the whole thing, this one from Dorman is reasonably priced.

Dorman 603-660 Front Washer Fluid Reservoir for Select Dodge/Ram Models.

https://a.co/d/4Jp2KzH

 0 Comment(s)