The truck is blowing white smoke after changing injectors.
Cylinders 3 and 4 were bad; the radiator was low on coolant, and the overflow was full.
It has a loss of power.
I think it blew a head, but I'm not sure.
Thanks: 6
Likes: 10
The truck is blowing white smoke after changing injectors.
Cylinders 3 and 4 were bad; the radiator was low on coolant, and the overflow was full.
It has a loss of power.
I think it blew a head, but I'm not sure.
Welcome to the family, bud!
Check the dipstick for a milky residue, the same goes for under the oil cap.
Quick free test to see for possible signs.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX
IGOTACUMMINS thanked for this post
Welcome!
You may want to perform a combustion block test to check for head gasket failure.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
IGOTACUMMINS thanked for this post
Posting Permissions
Register To Reply
Bookmarks