How many miles on the truck?Originally Posted by EC sam
Thanks: 37
Likes: 84
How many miles on the truck?
2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
2wd low loc kit.
Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.
IGOTACUMMINS thanked for this post
Try dropping the rear tire pressure into the 30 range and see how it feels.
Mine are picky, but I've got a ton of sidewall.
I wouldn't think it would be a huge deal at that tire size
Sent from my SM-S908U using Tapatalk
2014 Ram 3500 mega cab srw, full thuren 2.5 kit, 38" toyos, 4.56 gears, revmax 850 68RFE, grid heater delete w/ monster ram, steedspeed manifold, Ats aurora 6000 add a turbo(s465), ARP 625s, pushrods & springs, 5" tbe, sb filter, stock fuel
IGOTACUMMINS thanked for this post
I have had this same feeling with my 2013 for a few months now.
Everything in the rear is tight, and there is no movement.
Everything is new in the front end.
Alignment showed no thrust angle, but I still feel like the back end is kicking out on Accel.
I'm pretty much convinced its tires, or the rear limited slip is doing something funny.
Worn/soft bushings, urethane, rubber, etc., in the rear control arms, will allow the thrust angle to change dynamically.
It wouldn't necessarily show up on an alignment track.
I had that issue in the Camaro as well.
2015 / RAM / 2500 CTD-68RFE-4wd / 3.42 / stock tire size / Silver / Bighorn
Oops, it appears you have leaf springs, not coils.
Still, damaged spring or shackle bushings will allow the same type of movement.
2015 / RAM / 2500 CTD-68RFE-4wd / 3.42 / stock tire size / Silver / Bighorn
Have you checked the pin on the axle where the springs are bolted on?
I’m wondering if they broke off during the jackknife.
2016 Ram Laramie 3500, G56, 6.7, CC, 4x4
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
IGOTACUMMINS thanked for this post
That pin is referred to as a tie bolt, at least in most circles.
That should have shown up on the alignment rack, and I would notice dog tracking (I’ve not known the rear end to move back into place when I’ve broken them).
It's hard to say from this distance.
2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
2wd low loc kit.
Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.
I put a laser on my tires this weekend.
The result shows that the top of the tire is pushed out or vice versa.
However, the wheel does not wobble when turning.
Thoughts on that.
watersupply189 thanked for this post
How did you accomplish that?
Sent from my SM-S908U using Tapatalk
2014 Ram 3500 mega cab srw, full thuren 2.5 kit, 38" toyos, 4.56 gears, revmax 850 68RFE, grid heater delete w/ monster ram, steedspeed manifold, Ats aurora 6000 add a turbo(s465), ARP 625s, pushrods & springs, 5" tbe, sb filter, stock fuel
Curb shot.
2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
2wd low loc kit.
Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.
Posting Permissions
Register To Reply
Bookmarks