Thanks: 59
Likes: 102
I bought the kit, and now I have come to find out my turbo S464 won't fit because I’m running aftermarket Fox shocks with coilovers, which have a tall shock tower..
Turbo won't fit because it comes into contact with my shock tower.
I wish this were disclosed in the vehicle fitment description before purchase, but it is what it is.
Has anyone experienced this before; if so, what was your solution?
Pictures are coming shortly.
Sent from my iPhone using Tapatalk
I believe you will need to do a shock tower delete.
Hopefully, others will share their thoughts and experience with this.
https://shopamericaniron.com/product...-delete-plates
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Sent from my iPhone using Tapatalk
Carli makes this offset shock tower; I will do some more research.
Sent from my iPhone using Tapatalk
Can you get away with flipping the exhaust manifold so the flange faces up rather than down?
If it clears, be mindful that it may throw off fitment or alignment of the hot side intercooler pipe.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX
I thought that out; it would throw the intercooler fitment off; it may come into contact with the hood closing from sitting so high.
I don't know; I am weighing my options.
Thank you all for the suggestions.
Sent from my iPhone using Tapatalk
I have an S467 with the manifold flipped up running WC fab Intercooler piping.Originally Posted by Keron2233
2nd Gen 15* manifold, I believe it was.
You absolutely must have a good hot side heat blanket.
The turbo sits close to the main loom.
With the heat blanket, there are no issues, but it is tight.
Sent from my SM-G715U1 using Tapatalk
You got any pictures?
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
The evil fab kit is a high mount.
You'll need to flip the manifold up.
There's plenty of room.
Yup agreed.
Thanks.
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
Posting Permissions
Register To Reply
Bookmarks