Hi all, after a bit of advice.

Every so often, I would get the check engine light on. Smarty reports back the P0341 Camshaft position sensor.

As you do, Clear the code and think nothing of it.

Fast forward a few years of this intermittently happening.

I could run it for weeks, 5-10 miles daily to a 400-mile tank-to-tank run cross country.

Now it appears within 2-3 journeys, and today, it's cleared and greeted me again within 20-30 seconds of driving.

Nothing abnormal happens when the code is thrown, no stumble, no hesitation; it could be mid-cruise at 70, accelerating, decelerating, or idle.

Naturally, I Googled the hell out of it and had folk say check to the wire, check for chafing.

Someone has been there before because my A/C connector was rape-taped up.

Peeling it back along with the plastic sheathing reveals no chafing against the parts.

Nor does Smarty or APPcar see pending codes for P0341; it happens and is immediate.

Before getting one shipped over to the UK with my next Rock order, is there anything I can check while underneath or other points that I can get to that are hidden out of immediate view?

I'm reluctant to load parts cannon at things I can tackle.

I see the sensor, a piece of cake to get at.

Is it an arch nemesis-like wiring?

Any help is greatly appreciated.

Cheers!