Thanks Thanks:  0
Likes Likes:  6
Results 1 to 8 of 8

Thread: 5" Flo Pro installed yesterday

  1. Top Of Page | #1
    bfg2500's Avatar

    User Info Menu

    5" Flo Pro installed yesterday

    So I finally had some semi-warm weather to install my new 5" Flo Pro straight pipe and remove the 4" Flo Pro w/muffler. It sounds good, seems almost too quiet with the FTE Diesel Resonator I put in just before the axle hump. I'm getting a lot of vibration at idle with the 5" and when coming to a stop. Is this because the there's no flex pipe section like the stock down pipe had with my 4" exhaust?

    I can't hear my turbo at all anymore either and thinking that because the resonator is so far back just before the axle hump I've lost my turbo spool and growl of the engine.

    2016 Ram 2500 CCSB 6.7 in Black Forest Green, RaceME MM3 tuned by Ray @ Double R Diesel, WCFab FMW S467.7/83 .90A/R & Steed Speed Manifold 2nd Gen Swap, Flo-Pro 5" Straight Pipe w/FTE Diesel Resonator, Pusher 3.5" MEGA Intake Manifold, Pusher 3.5" MEGA Intercooler Tubes, DBALL2 Remote Starter, PIAA 85115 Superior Deep Bass Horns, Headlight Revolution Supernova V.4 LED Low/High beams, Bilstein 2.3" Level w/5100's all around, Thuren Adjustable Front Track Bar, ARP CA625+ Head Studs, RevMax 68RFE High Performance Towing/HD Valve Body, RevMax 68RFE ZeroStat Transmission Cooler Thermostatic Bypass.

  2. Top Of Page | #2
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    On my Flo Pro 5” TBE I just have the first section installed love the way mine sounds

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

  3. Top Of Page | #3
    Wisenheimer's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    Flex pipe fixed my vibration problems on the 5” exhaust. Kit didn’t come with one but I picked one up from Napa for pretty cheap and put it at the end of the down pipe.


    Sent from my iPhone using Tapatalk


  4. Likes walla2k5 liked this post
  5. Top Of Page | #4
    bfg2500's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    So how much did you cut off the down pipe to put the flex in? I was almost considering putting the stick 4" down pipe back on and attaching it to the 5" straight. I'm thinking just screw the resonator and put back in the straight pipe section.

    2016 Ram 2500 CCSB 6.7 in Black Forest Green, RaceME MM3 tuned by Ray @ Double R Diesel, WCFab FMW S467.7/83 .90A/R & Steed Speed Manifold 2nd Gen Swap, Flo-Pro 5" Straight Pipe w/FTE Diesel Resonator, Pusher 3.5" MEGA Intake Manifold, Pusher 3.5" MEGA Intercooler Tubes, DBALL2 Remote Starter, PIAA 85115 Superior Deep Bass Horns, Headlight Revolution Supernova V.4 LED Low/High beams, Bilstein 2.3" Level w/5100's all around, Thuren Adjustable Front Track Bar, ARP CA625+ Head Studs, RevMax 68RFE High Performance Towing/HD Valve Body, RevMax 68RFE ZeroStat Transmission Cooler Thermostatic Bypass.

  6. Likes walla2k5 liked this post
  7. Top Of Page | #5
    Wisenheimer's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    I think it was about a 12” section. It made a huge difference in vibration, exhaust tone, etc.


    Sent from my iPhone using Tapatalk


  8. Likes walla2k5 liked this post
  9. Top Of Page | #6
    Rob See's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    I have the 5" Flo Pro with muffler. No vibes. I re aligned the dp, fixed the rubber hanger positions then over tightened the clamps. Some guys weld a hanger by the dp. I noticed a lot of flexing in that area when under my truck while it was running.

    2012 Ram 3500 HO w/4.10
    Hellbent 2.5 level Bilstein 5100's
    Double R Diesel Warp tunes
    HPP egr delete
    FloPro 5" w/muffler
    CCV filter delete hose reroute to frame

  10. Likes walla2k5 liked this post
  11. Top Of Page | #7
    Wisenheimer's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    Mine vibrated and flexed enough to bust a weld on one of the hangers. Could have been manufacturing defect too but who knows. Pipe was warranties and flex pipe absorbed all the wiggles and vibrations


    Sent from my iPhone using Tapatalk


  12. Likes Rob See, walla2k5 liked this post
  13. Top Of Page | #8
    bfg2500's Avatar

    User Info Menu

    Re: 5" Flo Pro installed yesterday

    So I've been running the 5" Flo-Pro with the FTE Resonator for almost 2 weeks now, the vibrations and idle and low speed went away and sorted themselves out. I feel like I have no turbo, I can't hear any turbo spool at all, is this because of the resonator, was thinking of putting a muffler on it like I had on my 4" Flopro which I could hear is spool all day. I can't hear it with the exhaust brake on and high idle in the morning either when she's warming up.

    2016 Ram 2500 CCSB 6.7 in Black Forest Green, RaceME MM3 tuned by Ray @ Double R Diesel, WCFab FMW S467.7/83 .90A/R & Steed Speed Manifold 2nd Gen Swap, Flo-Pro 5" Straight Pipe w/FTE Diesel Resonator, Pusher 3.5" MEGA Intake Manifold, Pusher 3.5" MEGA Intercooler Tubes, DBALL2 Remote Starter, PIAA 85115 Superior Deep Bass Horns, Headlight Revolution Supernova V.4 LED Low/High beams, Bilstein 2.3" Level w/5100's all around, Thuren Adjustable Front Track Bar, ARP CA625+ Head Studs, RevMax 68RFE High Performance Towing/HD Valve Body, RevMax 68RFE ZeroStat Transmission Cooler Thermostatic Bypass.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •