Hi, I'm doing the same thing.
Can you help me with the installation instructions, too?
Thank you, and if you have any torque specifications, it will help.
Hi, I'm doing the same thing.
Can you help me with the installation instructions, too?
Thank you, and if you have any torque specifications, it will help.
See the attached information.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
I appreciate your help.
When I get my kit, I'll get busy.
Here’s an easy little trick for keeping crap out of injector tubes.
1/2” ID tubing plugged with hot glue.
07’ 2500 Mega 4x4 G56 (Thuren/Carli suspension; Dynatrac freespin; Smarty Jr)
14’ 2500 CrewC 4x4 Auto (stock)
Yeah, take your time with it and lay out the injector lines so you don't get them mixed up and don't get crap in anything fuel related.
Before you start, I recommend cleaning that area in your motor with an air hose if it's dirty.
I think Glacier Diesel had excellent directions and specs if I recall correctly.
This little do-dad here was the key to me getting that rear cover bracket loose around #6 injector.
13mm socket in the ratcheting box wrench.
Take lifing eye out and get the wiring out the way so wrench can go horizontal.
07’ 2500 Mega 4x4 G56 (Thuren/Carli suspension; Dynatrac freespin; Smarty Jr)
14’ 2500 CrewC 4x4 Auto (stock)
Is there a consensus on proper torque for hard fuel lines at the head and rail?
GDP instructions state 30nm/22ft at the head and 37nm/27ft at the rail.
However, FSM states 40nm/30ft for both.
07’ 2500 Mega 4x4 G56 (Thuren/Carli suspension; Dynatrac freespin; Smarty Jr)
14’ 2500 CrewC 4x4 Auto (stock)
I don’t have access to the factory-recommended torque for your 2007, 6.7L, but it should be the same as my 2014, 6.7, 30/30 Ft/lbs.
See attached from Mopar Tech Authority.
I think GDP may be giving the spec for the 5.9L.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Thanks, my 07’ is a 5.9L, and that FSM is 22/27 ftlbs.
Currently working in a 14’ 6.7
07’ 2500 Mega 4x4 G56 (Thuren/Carli suspension; Dynatrac freespin; Smarty Jr)
14’ 2500 CrewC 4x4 Auto (stock)
Bookmarks