Thanks: 0
Likes: 0
Quadzilla adrenaline questions
I just bought and installed a used Quadzilla adrenaline with pulse v2. Monitor i am very impressed with the power gains but there's no smoke i was told that that may not necessarily be bad I do like a coal roller but I don't wanna lose any power any way I can make it have both
also the guy said it would read my boost PSI but the monitor displays 0 there was one unused plug on the adrenalines wiring harness but i saw nowhere to plug it in is there something I'm not seeing
Thanks
the quad adds timing and fuel
but if you are not reading boost it may not getting all the fuel your supposed to
would also help if we could get some info in you truck
It's a 1999 5.9 cummins 53 block everything is bone stock except this programmer. Shouldn't the map sensor read the boost PSI
map sensor does not read boost PSI as it is on suction side. Boost PSI is usually read at the intake elbow
2014 Ram 2500 CCSB Ram Box Larime
2011 Ram 5500
2006 Diesel Jeep Liberty
RIP. 2016 Tradesman 2500 picked up 9/28/16 MM3 DRD Tuning 107K miles wrecked by jeep wrangler.....
Other Toys: 1973 Charger Bougham edition 400 big block 42K original miles
Unicycles (about 3 dozen)
6 in a row makes her go
i think on a 99 the boost sensor should be on the intake plate
Yeah That's what I meant. . . . Sorry Bout thatOriginally Posted by F350Cummins
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
So will I need to buy something additional to get it to read my boost or do I not have something hooked up right
what does that cable you have left over look like? Is it a Y cable? Or dead end???
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
It's a 3 pin male connector pins arranged in a triangle looks almost identical to the map sensor plug
It should connect to your MAP sensor. If it doesn't then its not made for your year truck.
Posting Permissions
Register To Reply
Bookmarks