I recently posted about some problems with my new transmission thinking it was just a relearn problem.
Well, 2 days ago, I got a CEL that was 2nd gear ratio error and P0944 which is hydraulic pressure loss of prime.
I cleared the codes and called the Randy's the next day.
They had me go through and check the filters to make sure they were seated correctly and that there isn't a double seal.
I checked them, and everything looked fine.
I filled it back up, and at that point, no codes had been rethrown.
Today I got the P0944, P0970 OD Hydraulic Pressure Test, and P0971 which is pressure test rationality.
When these codes popped, I was driving home, and the truck would only shift into 1st and 4th all the way home.
I got home restarted the truck, and everything was fine.
I cleared the codes and called Randy's.
They aren't sure what's going on and told me to let them know if it happened again.
It happened again about 2 hours ago at the time of posting this. I will give them a call tomorrow.
Does anyone have any idea of what's going on with this thing?
Bookmarks