AlfaOBD Adapter?

[Abgunnar]

I have a 2014 2500, anyone with AlfaOBD?

I don't know if I need an adaptor wire.

Also, I have a link FS USB to the OBD adaptor.

I use it for the scan.

Will that work with AlfaOBD?

Thanks for any advice.

 0 Comment(s)

[Skywrench]

This is what I use for AlfaOBD.

Works well for me.

Not sure about the vlink.

https://www.amazon.com/gp/aw/d/B07JF...b_b_asin_title


2016 3500 Laramie Mega DRW Aisin 3.73

 0 Comment(s)

[AK Bob]

Same here, I also use the OBDLink MX+.

 0 Comment(s)

[Abgunnar]

Would I need anything besides the OBD link MX To hook to the truck?

 0 Comment(s)

[AK Bob]

Would I need anything other than the OBD link MX To hook to the truck?

No, plug the adapter in the OBD port, and you will be ready.

 0 Comment(s)

[Jessalverson]

Question for this on 2018s with the security muddle.

If i use a bypass cable for the alpha OBD, will the original obd port still be viable for the MM3 to stay hooked to?

 0 Comment(s)

[AK Bob]

Question for this on 2018s with the security muddle.

If i use a bypass cable for the alpha OBD, will the original obd port still be viable for the MM3 to stay hooked to?

I don’t believe so.

To have AlfaOBD and MM3 going simultaneously, you would need a splitter.

The use of splitters with the MM3 is hit-and-miss.

I guess you could try it, but no guarantee.

Please keep us posted.

 0 Comment(s)

[Chrisn162001]

Question for this on 2018s with the security muddle.

If i use a bypass cable for the alpha OBD, will the original obd port still be viable for the MM3 to stay hooked to?

I have the hard wired bypass cable on mine.

It removes the original pins In the obd port and replaces them with the bypass ones that connect to the star connectors.

It works fine with my MM3.

The dealership scan tool does not work after using the hard wired bypass since witech has to read the security gate way on 2018 up trucks.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[AK Bob]

I have the hard wired bypass cable on mine.

It removes the original pins In the obd port and replaces them with the bypass ones that connect to the star connectors.

It works fine with my mm3.

The dealership scan tool does not work after using the hard wired bypass since witech has to read the security gate way on 2018 up trucks.


Sent from my iPhone using Tapatalk

Thanks for this information, will the OP be able to run Alfaobd and the MM3 simultaneously?

If so do you have a part number or source of supply for the hardwired bypass cable?

 0 Comment(s)

[Chrisn162001]

This wasn’t the splitter style, so no, you can’t run alpha pod and MM3 at the same time.

Type in SGW bypass RAM 2500 on eBay, and they will pop up.




Sent from my iPhone using Tapatalk

 0 Comment(s)