My AC is blowing harder out the floor than out my vents.
Do you have any idea what the problem is?
My AC is blowing harder out the floor than out my vents.
Do you have any idea what the problem is?
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Blend doors partially obstructed?
2016 Ram Laramie 3500, G56, 6.7, CC, 4x4
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Thank you for the info bro.
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Hello, When you have Air flow concern first is to inspect the Blower Intake, Wheel or face of evaporator. Restrictions (Dirt Material Fibers) in these areas will cause reduction in TOTAL Air flow.
Second is How the Hvac Case is designed on Directions of AIR flow out vents.
When Hvac case plenum splits the Air flow out Top or Bottom the lower floor vents are smaller so air flow may seem faster then Vents Due to Total vent across dash Usually 4 or more.
I would Just use panel vents and see if less over time meaning total air flow is reduced.
Temperature blend doors control air flow across Heater core and split this air flow to control Cold & Hot and BLEND these together.
When the Temp blend is splitting the air flow to divert across heater core then will feel reduced air due to Heater core Fin restriction's.
If your not concerned of VENT temp meaning it's cold then Temp blend I would suspect not fault.
Anytime you Use Panel & Floor your splitting the total air flow in the plenum portion of the case/
In experience's Lady's Mostly use this setting for air flow on their feet is preferred.
Unless you can verify Foam Large Tape fell off door and blocking some of the panel area I would say normal as designed.
Last edited by sootmaster; 07-05-2024 at 11:59 AM.
07.5 4x4 Yukon Detroit locker Rear AAM Elect-Front Locker, DOR Front Arm, ATS/Destroke Allison 1000 Conversion W/All 3-Billet Shafts, My Stage-5+ Allison, ATS Five Star TQ Converter, ATS CoPilot, Turbo America Custom VGT, Steed Speed Manifold, (UpGrading Compound Pusher turbo s480 soon) Motorsports Diesel 100% over custom Injectors, MotorSports Diesel 10.6 CP3, AirDog II 165-5G, Rail Pressure Relief 1-Stage, Update Common Rail, Mishimoto Intercooler, ARP 425 Studs, Hamilton Springs,Ret,PR
Bookmarks