Thanks Thanks:  0
Likes Likes:  2
Results 1 to 7 of 7

Thread: Bad MAP sensor or Bad Air intake temp sensor?

  1. Top Of Page | #1
    Basic Member Cummins Coal's Avatar

    User Info Menu

    Bad MAP sensor or Bad Air intake temp sensor?

    Hi I was wondering if you could give me any information on an issue I'm having? In the mourning while driving my heater grid light will come on along with 10 beeping noises the light stays on for about a minute then goes off..I notice while the light is on my boost levels won't go past 50lbs of boost until light goes off I do have compound turbos I have replaced my injectors with 50hp bosh injectors from exergy in June. I just want to know if it could be a bad air intake sensor by the air filter or a bad map sensor? I have no check engine lights coming on and it only does it once in the mourning but the temp outside was 82 degrees this mourning Thanks for your time and any info.


  2. Likes david3gen liked this post
  3. Top Of Page | #2
    Basic Member 9mgcb81's Avatar

    User Info Menu

    Re: Bad MAP sensor or Bad Air intake temp sensor?

    5.9?


  4. Top Of Page | #3
    Basic Member Cummins Coal's Avatar

    User Info Menu

    Re: Bad MAP sensor or Bad Air intake temp sensor?

    yes 2006 5.9 cummins


  5. Top Of Page | #4
    Basic Member 9mgcb81's Avatar

    User Info Menu

    Re: Bad MAP sensor or Bad Air intake temp sensor?

    Have you tried cleaning your sensors

    With it being that warm out. Next time you start the truck cold of the light is on don't wait for the grid light to go off. Just start it up. See if that changes anything

    My 09 has the grid deleted and getting cooler in the mornings (under 55) it tries to turn the heater on. I've found that letting everything power up and starting before the grid heater light goes off stops me from having the DTC/service light coming on


  6. Top Of Page | #5
    Basic Member Cummins Coal's Avatar

    User Info Menu

    Re: Bad MAP sensor or Bad Air intake temp sensor?

    Ok I will try that thanks for your help....


  7. Top Of Page | #6
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Re: Bad MAP sensor or Bad Air intake temp sensor?

    Quote Originally Posted by Cummins Coal View Post
    Ok I will try that thanks for your help....
    I agree. If there are no codes, chances are it's dirty. But take note, they can fall out of spec and not fail. Usually a dead seanor will throw a code.

    Do us a favor. So we don't have to drag out our crystal ball, please give the year, mods an milage in the beginning. It saves time

    Thanks

    The old grouch


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  8. Likes david3gen liked this post
  9. Top Of Page | #7
    Basic Member Cummins Coal's Avatar

    User Info Menu

    Re: Bad MAP sensor or Bad Air intake temp sensor?

    Quote Originally Posted by Polaraco View Post
    I agree. If there are no codes, chances are it's dirty. But take note, they can fall out of spec and not fail. Usually a dead seanor will throw a code.

    Do us a favor. So we don't have to drag out our crystal ball, please give the year, mods an milage in the beginning. It saves time

    Thanks

    The old grouch
    My truck is a 2006 5.9 cummins mileage 138,000...it has 50hp Bosch injectors,compound turbo system, and smarty s06..... Thanks for your response


    Sent from my iPhone using Tapatalk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •